Product Features
- Perfect Repair: Metal glue is a high strength epoxy adhesive used as an alternative to torch welding, providing strong and durable repairs to metal and several other surfaces, forming a strong and stable permanent bond. This product can be cured at room temperature, easy to use, high strength, good wear resistance, heat resistance, corrosion resistance and impact resistance.
- Wide Application: Our metal repair glue is suitable for repairing bonding metals, ceramics, glass, and many plastics.and can also be used as general structural glue for bonding. It adheres to virtually any dry surface free of dirt and oil, and can be shaped, filed, sanded, drilled, etc., depending on its application.
- Easy to Use: Our glue for metal adopts a push rod design, which can ensure that the paste in the A and B tubes is extruded at the same time in a ratio of 1:1,There is no need to control the glue ratio by yourself.First, please make the surface clean before the process. Then, Use the pusher to push out the appropriate amount of glue at a 1:1 ratio on a flat surface, and use the stirrer to mix it evenly (usually 5 minutes, if not, it will affect the bonding effect). Last, apply it to the surface and give it 24 hours for full curing.
- Safe and Non-toxic: Metal glue is a clean, odorless, and environmentally friendly product, 100% safe. We insist on the production of exclusive metal glue formula, which has passed MSDS, SGS, and various safety reports. We take environmental protection as the concept, to ensure that your repaired products are safe and clean.
- Fast Service:If you have any problems, Please feel free to contact us, and we will solve your problems within 24 hours. Please trust assured buying that we will be responsible for each customer.
Product Features
- J-B Weld HighHeat is a two-part epoxy system that provides strong, lasting, heat-resistant repairs up to 550°F. Mixed at a ratio of 1:1, it forms a permanent bond that has a 4730 PSI strength and is chemical and fuel resistant. At room temperature, HighHeat sets in 1 hour and cures in 24 hours. HighHeat’s cure time is accelerated by heat and can cure in 1 hour at 250°F.
- CURE AND SET TIME: At room temperature, HighHeat sets in 1 hour and cures in 24 hours. HighHeat’s cure time is accelerated by heat and can cure in 1 hour at 250°F.
- PRODUCT FEATURES AND STRENGTH: J-B Weld HighHeat is a two-part epoxy system that provides strong, lasting, heat-resistant repairs up to 550°F. Mixed at a ratio of 1:1, it forms a permanent bond that has a 4730 PSI strength and is chemical and fuel resistant.
- SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass
Product Features
- 【High Bonding Strength】Lubynia metal glue adopts epoxy resin structural adhesive. Compared with ordinary metal adhesives, metal glue heavy duty has higher heat resistance, corrosion resistance and wear resistance, improving the crack resistance and integrity of components.
- 【Wide Application】Metal repair glue has multiple functions-joining, repairing, sealing and reinforcing. Super glue for metal is mainly used for bonding metal to metal, ceramic to metal, ceramic to ceramic and other high temperature resistant parts.
- 【Easy to Use】Just a few simple steps to apply metal to metal glue. First, please clean the surface thoroughly before starting. Then, using the pusher to evenly apply the proper amount of glue at a 1:1 ratio over a stirring plate, and use the stirring rod to fully combine A and B metal epoxy glue. Finally, apply the mixed super glue for metal to the surface and wait for 24 hours to fully cure.
- 【Thoughtful Package】For customers’ convenience, Lubynia metal epoxy glue is with a complete kit, including A and B metal glue(1.412oz*2), wooden stirring rod*2, disposable gloves*1, stirring plate*1.
- 【After-sales Service】 Our aim is for customers to enjoy a satisfying purchasing experience. If you have any questions about metal epoxy glue, please feel free to contact us. We’ll provide you with a satisfactory response.
Product Features
- LONG-LASTING BOND STRENGTH: Our metal epoxy glue is of good quality, and we guarantee that your repaired products will last for at least one year. Once cured, metal repair glue can form a strong and stable permanent bond. Compared with traditional epoxy, AB epoxy glue is high adhesion and good hardness, and a certain toughness.
- WIDE APPLICATION: Our metal repair glue is suitable for repairing bonding metals, ceramics, glass, and many plastics. It not only can be used to repair fuel tanks, plumbing, concrete breaks, water tank, and plastic bucket but can be used for boats, cars, fuel tanks, heaters, vases, fence welding car bumpers, and motorcycle crack repair.
- SAFE AND CLEAN: Our metal to metal glue is a clean, odorless, and environmentally friendly product, 100% safe. We insist on the production of exclusive metal glue formula, which has passed MSDS, SGS, and various safety reports. We take environmental protection as the concept, to ensure that your repaired products are safe and clean.
- SIMPLE TO USE: The way to use our metal glue heavy duty is very simple. First, please make the surface clean before the process. Then, Use the pusher to push out the appropriate amount of glue at a 1:1 ratio on a flat surface, and use the stirrer to mix it evenly (usually 5 minutes, if not, it will affect the bonding effect). Last, apply it to the surface and give it 24 hours for full curing.
- 100% REFUND GUARANTEE: We are very confident in the quality of our strong casting glue. If it is damaged due to reasons of quality within 1 year, we will provide a 100% refund to protect the rights of our customers.
Product Features
- FIRST CHOICE FOR ALL REPAIRS – PEGATANKE epoxy glue is designed to repair exhaust piping, fuel tanks, water tanks, coolant tanks, pressure tanks, catalytic converters, bumpers, mirrors, surface cracks and more! PEGATANKE works on virtually any surface; however, it’s not as effective when applied to acrylic.
- DEVELOPED FOR THE MOST DEMANDING INDUSTRIES – PEGATANKE, a professional grade resin, was originally developed for use in automotive, naval, electrical, military, construction and aerospace industries. PEGATANKE is a metal-to-metal glue of unparalleled quality.
- STRONG, RESILIENT & WATERPROOF – Designed for heavy duty uses, it holds up to 550 pounds of dead weight per 1.48 oz of glue and resists up to 120 PSI of high pressure! The epoxy resin also works underwater even when completely submerged, allowing you to fix nautical machinery and underwater components in no time. PEGATANKE also withstands relatively high temperatures.
- EASY TO USE – 1. Clean application area thoroughly, 2. Mix compounds 1 & 2 together equally, 3. Stir with spatula provided for 3 mins, 4. Apply PEGATANKE, 5. Join parts, 6. PEGATANKE is dry in 30 minutes in the sun or between 90-120 minutes in the shade, and total curation is around 8 hours.
- WORKS ON ALMOST EVERY SURFACE – Metal, steel, aluminum, copper, MDF, ceramic, paving stone, wood, glass, PVC, plastic, tile & fiberglass. PLEASE NOTE THAT PEGATANKE IS A THICK PASTE.
Product Features
- LONG-LASTING BOND STRENGTH: Our metal glue is made of good quality, and it can make your repaired products last for at least one year. Once cured, metal repair glue can form a strong and stable permanent bond. Compared with traditional epoxy, AB epoxy glue is high adhesion and good hardness, and a certain toughness.
- WIDE APPLICATION: Our metal repair glue is suitable for repairing bonding metals, ceramics, glass, and many plastics. It not only can be used to repair fuel tanks, plumbing, concrete breaks, water tank, and plastic bucket but can be used for boats, cars, fuel tanks, heaters, vases, fence welding car bumpers, and motorcycle crack repair.
- SAFE AND CLEAN: Our metal glue heavy duty is a clean, odorless, and environmentally friendly product. We insist on the production of exclusive metal glue formula. We take environmental protection as the concept to ensure that your repaired products are safe and clean.
- SIMPLE TO USE: The way to use our metal to metal glue is very simple. First, please make the surface clean before the process. Then, Use the pusher to push out the appropriate amount of glue at a 1:1 ratio on a flat surface, and use the stirrer to mix it evenly (usually 5 minutes, if not, it will affect the bonding effect). Last, apply it to the surface and give it 24 hours for full curing.
- COMPLETE ACCESSORIES: Our metal glue has a complete set of accessories, including A and B metal adhesive (80g*2), disposable gloves*2, wooden stirring rod*4, stirring plate*2. Quickly repair damaged areas, the complete kit is more convenient to use and less likely to get dirty hands or other parts of the home.
Product Features
- Muti-Purpose: Our metal epoxy glue is a two-part heavy-duty high-temperature epoxy adhesive with clear, fast curing that not only acts as a filler for casting defects such as iron, copper, and cracking Castings, but also can be used as an adhesive for a wide range of materials like tile, wood, metal, ceramic, and glass to repair machinery, tools, pipes, and more.
- Easy Application: Our metal repair glue features a dual-syringe design for easy 1:1 mixing ratios. The metal repair glue is easier to use than the traditional A and B metal glue separation. Conveniently dispense equal parts two-part formulation resin and hardener to create a tough, rigid, high-strength bond. The unique syringe has a resealable cap to prevent drying out and leaks.
- Long-lasting Bond Strength: Our heavy duty metal glue dries clear and repairs large or multi-piece projects with a permanent bond after only one application. It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs, and laminating.
- Easy to Use: Just a few simple steps to use. When using our adhensive glue for metal to metal, use a push rod to push out an appropriate amount of glue onto the surface, stir evenly with a wooden stick (usually 5 minutes), then apply the mixture to the clean surface of the material to be bonded, and place the parts to be welded in the appropriate position as required! (For pressurized items, you need to wait until fully solidified before using)
- After-Sales Service: We are committed to providing customers with high-quality after-sales service. If you have any questions about our heat resistant glue, please get in touch with us in your free time. We are always at your service.
Product Features
- Industrial strength, titanium-reinforced epoxy
- Bonds and repairs materials exposed to high temperatures up to 500F
- Cures to a hard, metal-like repair
- Non-shrinking formula
Product Features
- WHAT This is a two component heavy duty high temperature resistant epoxy glue with mayonnaise consistency. Capacity is 1.76oz, allowed thin application. Mixed ratio (1:1) ; syringe; non-toxic and non-irritating odor. Can be used for boats, cars, fuel tanks, water pipes, heaters, vases, fence welding car bumpers and motorcycle crack repair. It is also very good cold welding glue.
- WHAT IS IT CAPABLE OF 5 minutes to set, 24 hours to fully curing, can be different materials welded together at the same time, such as metal aluminum, copper, iron, stainless steel, wood, plastic, glass, cured strength up to 4680PSI, can be stable between -65 ℃ ~ 287 ℃, cured gray, can be drilled, sanded, spray paint coloring, so that your items repaired to the original appearance.
- WHAT CAN BE USED FOR Excellent impact resistance and strength helps to recover your car or boat cracks and holes. It is also suitable for repairing/fastening radiators, water pipes, tanks, pools, oil drums, cracks in bumpers or motorcycle fairings, broken headlight brackets, torn RV paneling fences, vases, swings, etc.
- WHY WE RECOMMEND IT With its wide range of applications, excellent properties and almost ultimate cost performance, this epoxy glue can meet your needs in most usage scenarios at a very low cost and with guaranteed good quality! It’s your fixer-upper!
- ADDITIONAL SERVICES If you need to contact us to provide an SGS test report and SDS composition report for your better use, also, you can inform us of your We will recommend to you the most economical way to use our products, We will recommend you the most economical, the best use, and the most suitable for your glue according to your use scenario needs.
Product Features
- Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains No Solvents Or Volatile Organic Compounds (Vocs).
- The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It Creates A Permanent Bond Stronger Than Steel.
- Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam Connections Or Holes.
- Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes, Gas And Commercial Furnaces And Water Heaters.
